Comment on amt-2022-259

Abstract

The instrumentation of the High Altitude and Long Range (HALO) research aircraft is extended by the new Broadband AirCrAft RaDiometer Instrumentation (BACARDI) to quantify the radiative energy budget. Two sets of pyranometers and pyrgeometers are mounted to measure upward and downward solar (0.3–3 μm) and thermal-infrared (3–100 μm) irradiances. The radiometers are installed in a passively ventilated fairing to reduce the effects of the dynamic environment, e.g., fast changes of altitude and temperature. The remaining thermal effects range up to 20 W m-2 for the pyranometers and 10 W m-2 for the pyrgeometers; they are corrected using an new efficient method that is introduced in this paper. Using data collected by BACARDI during a night flight, the thermal offsets are parameterized by the rate of change of the radiometer sensor temperatures. Applying the sensor temperatures instead of ambient air temperature for the parameterization provides a linear correction function (200–600 W m-2 K-1 s), that depends on the mounting position of the radiometer on HALO. Furthermore, BACARDI measurements from the EUREC4A (Elucidating the role of clouds-circulation coupling in climate) field campaign are analyzed to characterize the performance of the radiometers and to evaluate all corrections applied in the data processing. Vertical profiles of irradiance measurements up to 10 km altitude show that the thermal offset correction limits the bias due to temperature changes to values below 10 W m-2. Measurements with BACARDI during horizontal, circular flight patterns in cloud-free conditions demonstrate that the common geometric attitude correction of the solar downward irradiance provides reliable measurements in this typical flight sections of EUREC4A, even without active stabilization of the radiometer.