Abstract
Combustion instability of pilot flame has been investigated in a model pilot bluff body stabilized combustor by running the pilot flame only. The primary objectives are to investigate the pilot flame dynamics and to provide bases for the study of the interaction mechanisms between the pilot flame and the main flame. Dynamic pressures are measured by dynamic pressure transducers. A high speed camera with CH∗ bandpass filter is used to capture the pilot flame dynamics. The proper orthogonal decomposition (POD) is used to further analyze the high speed images. With the increase of the pilot fuel mass flow rate, the pilot flame changes from stable to unstable state gradually. The combustion instability frequency is 136Hz when the pilot flame is unstable. Numerical simulation results show that the equivalence ratios in both the shear layer and the recirculation zone increase as the pilot fuel mass flow rate increases. The mechanism of the instability of the pilot flame can be attributed to the coupling between the second order acoustic mode and the unsteady heat release due to symmetric vortex shedding. These results illustrate that the pilot fuel mass flow rate has significant influences on the dynamic stability of the pilot flame.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.