Abstract
Oxy-fuel circulating fluidized bed combustion (CFBC) is one of the emerging technologies for reducing green house gas emissions from fossil fuel power generation. To improve the overall efficiency of an oxy-fuel CFBC plant and reduce the cost of CO2 capture, high oxygen concentration combustion is desired, as it means a lower flue gas recycle ratio and a smaller combustion chamber. To support the study of high oxygen concentration oxy-fuel research, combustion characteristics of different fuels were determined in a thermogravimetric analyzer (TGA). The fuels tested include lignite, bituminous coal, anthracite, and petroleum coke. Results showed that under the conditions tested, oxygen concentrations had only weak effect on the ignition of all the fuels. However, higher oxygen levels, as expected, reduced the burnout time. It was noticed that at typical CFBC combustion temperatures (˜900 °C), direct reaction between CO2 and carbon is negligible, even though the CO2 concentrations in the gas mixtures were high.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
