Combustion behavior and effluent liquid properties in extra-heavy crude oil reservoirs developed by steam huff and puff

Abstract

In recent years, interest in in-situ combustion (ISC) as an alternative technique for extra-heavy crude oil reservoirs subjected to steam huff and puff has grown significantly; however, the ISC behavior and effluent liquid properties in such oil reservoirs remain under-explored. In this work, the combustion tube (CT) was used to investigate the combustion behavior of extra-heavy crude oil. Also, the effluent liquid properties during ISC were analyzed comprehensively. The results revealed that when the secondary water bodies (SWB) were present at the injection end of CT, a stable combustion front advanced, causing a gradual temperature rise and a CO2 concentration above 12 % in the effluent gas. This suggested that steam injection wells in these reservoirs were suitable candidates for subsequent air injection after steam huff and puff. Conversely, when the SWB was located at the production end of CT, the peak temperature of combustion decreased, indicating a transition to medium-temperature combustion and unstable combustion front advancement, making steam injection wells unsuitable for ISC as production ones. Three key criteria for evaluating ISC effectiveness in extra-heavy crude oil were: (1) the intensity of –CH2 and –CH3 peaks, (2) the C-O absorption peak between 1100 and 1000 cm−1, and (3) the distribution of characteristic peaks around 750 cm−1. A significant decrease in these peaks indicated high-temperature combustion and substantial oil upgrading. Also, the presence of alkynes suggested extensive thermal cracking and a stable combustion front. The anion concentration of effluent water increased compared to crude water, but the relationship between water ion concentration and combustion state was weak, without a discernible pattern.