Abstract
A combustion and heat transfer model in oxy-fired CFBB was set. Particle diameter, voidage of the bed ,etc, was analyzed with 30%, 50%, and 70% oxygen. Take a 300MW CFBB for example, the heat transfer characteristics in furnace were numerical simulated. In the sparse zone, heat transfer coefficient is proportional to oxygen concentration at the same voidage of the bed; under the same operation condition, the heat transfer coefficient in CFB increases with the voidage of the bed at first, then it decreases. It was found the heat transfer capability decrease due to the higher concentration of oxygen. It is necessary to set an external heat exchanger to keep a normal combustion
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.