Abstract
AbstractThe present investigation compares the combustion, performance, and exhaust emissions of diesel fuel in blends with either 24% n-butanol or 24% diethyl ether (DEE), and of vegetable (cottonseed) oil in blends with either 20% n-butanol or 20% diethyl ether, fueling a standard, experimental, single-cylinder, four-stroke, high-speed direct injection (HSDI), Hydra diesel engine operated at three different loads. Fuel consumption, and exhaust smoke, nitrogen oxides (NOx), carbon monoxide (CO), and total unburned hydrocarbons (HC) were measured. The differences in combustion, performance, and exhaust emissions of those biofuel blends are compared from the baseline operations, i.e., when working with the neat base fuels (diesel fuel or vegetable oil). Fuel injection, combustion chamber pressure, heat release rate, and temperature diagrams, reveal interesting features of the combustion mechanisms. These results and the differing physical and chemical properties of those biofuels are used to aid the interp...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.