Combining techno-economic modeling and spatial analysis for heat planning in rural regions: A case study of the Holbæk municipality in Denmark

Abstract

This study examines the opportunities and challenges related to heat decarbonization in rural municipalities by applying a spatial analysis in combination with techno-economic modeling using TIMES. While the transition to low-carbon heating technologies is progressing in urban areas, this shift is happening more slowly in rural areas, reflecting a difference in decarbonization rate between urban and rural contexts. This study takes the Holbæk Municipality in Denmark as a case to investigate the potential for rural heating systems considering local fuels, excess heat, and investments in different energy infrastructures. The technology options investigated include both individual heating technologies, such as domestic boilers and heat pumps, and district heating. The modeling results demonstrate that use of excess heat from the municipal wastewater treatment plant and the neighboring industrial site for district heating competes with individual heating systems that have heat pumps and biogas-fueled boilers, where the mix depends on the conditions assumed for each technology and the heat demand density. The extent of district heating expansion differs between districts in the municipality, ranging from 14% to 100% depending on the heat demand density and proximity to the current district heating network. The different possibilities for the transition of the heating sector revealed in this work indicate that a successful transition will require both a clear policy for the heating sector and an explicit decarbonization strategy for the industries that can provide excess heat for district heating.