Combining In-Tip Reaction and Infrared Thermal Imaging for Fast and Portable Enthalpimetric Analysis.

Abstract

In this work, the in-tip thermal infrared enthalpimetry (in-tip TIE) method is proposed for fast enthalpimetric analysis. In this method, the reactions inside the tips of a multichannel pipette were combined with temperature monitoring by an infrared camera. The filter paper was used inside the tips to retain reagents as solutions (wetted paper mode) or as solids (dried paper mode) to perform neutralization, redox, or precipitation reactions. The dried reagents inside the tips were obtained by oven drying a solution retained in the filter paper. The determination of the total acidity of the vinegar, ascorbic acid in vitamin C tablets, and chloride in soy sauces and saline inhalation solutions was performed as examples of the application of the proposed method. The agreement with reference methods ranged from 98 to 107%. The use of reagents dried inside the tip was feasible, leading to a simple aspiration of sample solution within the 12 tips of the pipette to perform a rapid analysis (1 min). Therefore, up to 720 measurements in 1 h were feasible for in-tip TIE over up to 12 measurements for the reference methods. Moreover, miniaturization reduced reagent consumption and residue generation. For example, for in-tip TIE, only 3.6 mL of residues was generated (n = 12) over 60-240 mL in reference methods (n = 3). Contrarily to other TIE methods, no microplates or stirring was required, opening possibilities for field analysis since the multichannel pipette and the infrared camera are both operated with batteries.