Abstract
The role of hydrogen trapping behavior in hydrogen-assisted cracking in a Ni–Fe–Cr alloy has been investigated using thermal desorption spectroscopy (TDS), hydrogen visualization, and high-resolution microstructural characterization methods. The results indicate that hydrogen resides at interstitial lattice sites, dislocations, and vacancies with the ascending order of the desorption activation energies. This study firstly shows that hydrogen is trapped reversibly at dislocations including misfit dislocations at the austenite/δ phase interface, and deformation-induced dislocations. The hydrogen trapping behavior is proved by TDS and hydrogen visualization technique. The weakly trapped hydrogen at dislocations provides sufficient hydrogen to build up a required critical hydrogen concentration at potential flaws for crack nucleation and to activate hydrogen enhanced decohesion mechanism. Further, it was found that δ phase precipitation exacerbates the hydrogen embrittlement sensitivity. For the first time, evidence for hydrogen transport by dislocations in a Ni-based alloy is observed by the hydrogen visualization technique.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
