Abstract
A hybrid electrodynamic (ED) propulsion system intended for 480 km/hr and 100 kN thrust is described using an integral system of ED repulsive suspension and ED lateral guidance of the vehicle on a common primary structure. The machine is intended to operate as a hybrid synchronous-induction motor with the Maglev vehicle carrying the primary structure; the guideway is passive. An array of 20 K HTSC superconducting excitation coils on-board the vehicle yields a magnetic potential well over a 50 mm airgap with high lateral restoring forces sufficient to stabilize and levitate a 75 tonne vehicle. The proposed cryogenic support system uses gaseous helium cooling. Test results are provided from an active guideway 1/16th scale Maglev using a 28 mm airgap and normal conducting excitation.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
