Abstract
Diffusive equilibrium in thin films (DET) and diffusive gradients in thin films (DGT) were applied in situ to obtain high spatial resolution dissolved reactive phosphorus (DRP) sediment porewater profiles in two lagoons of the Gippsland Lakes (SE Australia) during summer. Although the DRP depth profiles were different in each lake, highlighting the sensitivity of DRP to the redox state of the sediment spatial DRP variations obtained from DET and DGT showed striking similarities with depth in each lake. Comparison of DRP concentrations obtained from DGT and DET allows an assessment of the reactivity of the sediment. A dynamic numerical model of DGT-induced flux in sediments (DIFS) quantified reactivity kinetics. Sediment response time (Tc) related to sedimentary phosphorus resupply resulting from DGT-induced lowering of the porewater DRP concentration was calculated. Values of Tc ranged from 4128 to 183 400 s and from 55 to 149 400 s for Lakes Victoria and Wellington, respectively. These results indicate the limited capacity of the sediment to quickly resupply DRP to the porewater, especially in surface sediment which was always characterized by the highest Tc. Adsorption and desorption rate constants were also calculated from DIFS with values ranging from 2 x 10(-3) to 2 x 10(-2) day(-1) and from 0.3 to 21 day(-1) for Lake Victoria and from 2 x 10(-4) to 0.8 day(-1) and from 0.6 to 1558 day(-1) for Lake Wellington, respectively. Diffusive fluxes estimated from the in situ DRP gradient at the sediment-water interface by DET were 558 and 1.2 micromol m(-2) day(-1) in lakes Victoria and Wellington, respectively. Despite only a single measurement, these fluxes highlight a substantial contribution of P from the sediment to the water column in summer for Lake Victoria which is likely to contribute to the recurring blooms of blue-green algae. These calculated fluxes obtained with minimal sediment disturbance and high spatial resolution were substantially different (by a factor of 6-180) from other reported values using more conventional quantitative assessments such as diffusive fluxes (from core slicing) and benthic chambers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
