Abstract

Boundary layer separation control with pulsed vortex generator jets (VGJs) has been studied on a very high lift, low-pressure turbine airfoil in the presence of unsteady wakes. Experiments were done under low (0.6%) and high (4%) freestream turbulence conditions on a linear cascade in a low speed wind tunnel. Cases were considered at Reynolds numbers (based on the suction surface length and the nominal exit velocity from the cascade) of 25,000 and 50,000. Wakes were produced from moving rods upstream of the cascade with flow coefficient 1.13 and rod spacing equal 2 blade pitches, resulting in a dimensionless wake passing frequency F = fLj-te/Uave = 0.14, where f is the frequency, Lj-te is the length of the adverse pressure gradient region on the suction surface, and Uave is the average freestream velocity. The VGJs were injected at the beginning of the adverse pressure gradient region on the suction surface with maximum jet velocity in each pulse equal to the local freestream velocity and a jet duty cycle of 10%. Several different timings of the VGJs with respect to the wakes were considered. Pressure surveys on the airfoil surface and downstream total pressure loss surveys were documented. Instantaneous velocity profile measurements were acquired in the suction surface boundary layer and downstream of the cascade. In cases without VGJs, the boundary layer momentarily reattached in response to the wake passing, but separated between wakes. The VGJs also caused reattachment, and if the VGJ pulsing frequency was sufficiently high, separation was largely suppressed for the full wake passing cycle. The timing of the VGJs with respect to the wakes was not very important. The jet pulsing frequency needed for separation control was about the same as found previously in cases without wakes. The background freestream turbulence effect was negligible in the presence of the larger wake and VGJ disturbances.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call