Abstract

AbstractEffects of hot water treatment (HWT) and modified atmosphere packaging (MAP) on quality of tomatoes were studied. Prior to packaging with low‐density polyethylene (LDPE) film (0.02 mm in thickness), tomatoes were immersed in hot water (42.5°C) for 30 min. Control tomatoes were not treated and were stored for 2 weeks at 10°C and then for 3 days at 20°C without packaging. Steady states of O2 and CO2 concentrations inside the package were about 5 and 8%, respectively, and were reached after 6 and 4 days of storage, respectively. MAP reduced weight loss of tomatoes to about 41% of that of unpackaged fruit during a 2‐week storage period. The use of a combination of HWT and MAP reduced weight loss and decay, inhibited color development and maintained firmness of tomatoes but had no effect on soluble solids content or titratable acidity. HWT slightly reduced mold growth of tomatoes stored in MAP. Packaging of control fruit in MAP resulted in stimulation of mold growth around the stem end of the fruit after about 1 week of storage and also resulted in cracking and decay. HWT could be used as disinfectant for tomatoes prior to storage in MAP in order to reduce microbial growth, cracking and decay that may be caused by excessive water vapor inside the package. Copyright © 2003 John Wiley & Sons, Ltd.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.