COMBINED EFFECTS OF FLANK AND CRATER WEAR ON CUTTING FORCE MODELING IN ORTHOGONAL MACHINING—PART II: BAYESIAN APPROACH-BASED MODEL VALIDATION

Abstract

Flank and crater wear are the primary tool wear patterns during the progressive tool wear in metal cutting. Cutting forces may increase or decrease, depending on the combined contribution from the flank and/or crater wear. A two-dimensional (2D) slip-line field based analytical model has been proposed to model the force contributions from both the flank and crater wear. To validate the proposed force model, the Bayesian linear regression is implemented with credible intervals to evaluate the force model performance in orthogonal cutting of CK45 steels. In this study, the proposed analytical worn tool force model-based predictions fall well within the 75% credible intervals determined by the Bayesian approach, implying a satisfactory modeling capability of the proposed model. Based on the parametric study using the proposed force model, it is found that cutting forces decrease with the increasing crater wear depth but increase with the increasing flank wear length. Also, the predicted cutting forces are affected noticeably by the friction coefficients along the rake and flank faces and the ratio of crater sticking region to sliding region, and better knowledge of such friction coefficients and ratio is expected to further improve worn tool force modeling accuracy. Compared with the finite element approach, the proposed analytical approach is efficient and easy to extend to three-dimensional worn tool cutting configurations.