Combined conditioning of inorganic coagulant and polyamine to improve the dewaterability of municipal sludge, minimize dosage and reduce the influence of filtrate.

Abstract

Efficient dewatering of sludge is necessary for its cost-effective transportation and final disposal. However, the common method of using polyferric sulfate (PFS) and polyacrylamide (PAM) requires a large amount of dosage and produces high iron ion content in the filtrate. This study examined a solution of applying polyamine (PA) coupled with inorganic coagulant PFS. The results demonstrated that using PFS + PA together could achieve the same or similar filtering rates as using PFS + PAM. The capillary suction time (CST) of PFS + PA (89.0 s) was equivalent to that of PFS (75.1 s) and better than that of PA (117.1 s) and raw sludge (RS, 403.8 s). Compared with PFS + PAM, the combination of PFS and PA efficiently removed Fe ions and chemical oxygen demand (COD) in sludge water content, with Fe ions in the sludge filtrate reduced by 97.8% and COD reduced by 78.9%, respectively. By analyzing the basic physicochemical properties of the sludge system, including the synergistic effect of coagulation and flocculation, sludge hydrolysis and flocculation, it indicated that PA + PFS could reduce bound water. These results demonstrated that combining PFS and PA to improve sludge dewatering performance is more beneficial than utilizing a coagulant or flocculant alone, even PFS + PAM.