Abstract
AbstractWe report on a sodium fluoride (NaF) thickness variation study for the H2Se batch furnace selenization of sputtered Cu(In,Ga) films in a wide range of Cu(In,Ga) film compositions to form Cu(In,Ga)Se2 (CIGSe) films and solar cells. Literature review indicates lack of consensus on the mechanisms involved in Na altering CIGSe film properties. In this work, for sputtered and batch‐selenized CIGSe, NaF addition results in reduced gallium content and an increase in grain size for the top portion of the CIGSe film, as observed by scanning electron microscopy and secondary ion mass spectrometry. The addition of up to 20 nm of NaF resulted in an improvement in all relevant device parameters: open‐circuit voltage, short‐circuit current, and fill factor. The best results were found for 15 nm NaF addition, resulting in solar cells with 16.0% active‐area efficiency (without anti‐reflective coating) at open‐circuit voltage (VOC) of 674 mV. Copyright © 2013 John Wiley & Sons, Ltd.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
