Abstract
In this work, we report on the fabrication results of surface acoustic wave (SAW) devices operating at frequencies up to 8 GHz. In previous work, we have shown that high acoustic velocities (9 to 12 km/s) are obtained from the layered AIN/diamond structure. The interdigital transducers (IDTs) made of aluminium with resolutions up to 250 nm were successfully patterned on AIN/diamond-layered structures with an adapted technological process. The uniformity and periodicity of IDTs were confirmed by field emission scanning electron microscopy and atomic force microscopy analyses. A highly oriented (002) piezoelectric aluminum nitride thin film was deposited on the nucleation side of the CVD diamond by magnetron sputtering technique. The X-ray diffraction effectuated on the AIN/diamond-layered structure exhibits high intensity peaks related to the (002) AIN and (111) diamond orientations. According to the calculated dispersion curves of velocity and the electromechanical coupling coefficient (K2), the AIN layer thickness was chosen in order to combine high velocity and high K2. Experimental data extracted from the fabricated SAW devices match with theoretical values quite well.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.