Abstract
In this study, a two-step process combining aqueous two-phase extraction (ATPE) with chromatography was developed for extraction and purification of alliin from garlic powder. The partition coefficient and yield value of alliin in different types of aqueous two-phase system (ATPS) were compared and response surface methodology (RSM) was used for analyzing and optimizing the extraction process. The optimal extraction conditions of 19% (w/w) (NH4)2SO4, 20% (w/w) 1-prpanol, at 30°C, pH 2.35 with 8.54% (w/w) NaCl was chosen based on the higher yield. Compared to the results obtained with the conventional extraction method, this method had an evident advantage on yield (20.4mg/g versus the original yield of 15.0mg/g) and the concentration of alliin in extract solution by ATPE was close to three times of that with conventional extraction. The purification of alliin was carried out with the ammonium form of sulfonic acid cation-exchange resins 001×7. Sample solution with alliin concentration of 1mg/mL was passed through resins and the desorption of alliin was accomplished by water at the flow velocity of 0.5mL/min, 1.5mL/min, respectively. The purity and recovery of alliin after purification were 80% and 76%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.