Abstract

Composite diazotization–coupling reagents containing sulfanilic acid (SA) as the diazotisable aromatic amine and sodium 1-naphthol-4-sulfonate (NS), 1-naphthol or phenol as the coupling agent were used for the spectrophotometric determination of trace amounts of nitrate and nitrite. Column preconcentration on a naphthalene–tetradecyldimethylbenzylammonium (TDBA)–iodide (I) or biphenyl–trioctylmethylammonium chloride (TOMA)–bromate (BrO3) adsorbent was used. Nitrate was determined by use of a Cd–Cu column which converts nitrate into nitrite. Nitrite ion reacted with SA in the pH range 2.1–2.8 for the SA–NS system, 2.0–2.75 for the SA– 1-naphthol system and 2.2–2.6 for the SA–phenol system in hydrochloric acid medium to form water-soluble, colourless diazonium cations. These cations were coupled with NS in the pH range 10.0–13.0, 1-naphthol in the pH range 1.6–4.6 and phenol in the pH range 9.05–13.0 to be retained on naphthalene–TDBA–I for SA–NS and SA–1-naphthol and on biphenyl–TOMA–BrO3 for SA–phenol. The solid mass was dissolved from the column with 5 ml of the final dimethylformamide (DMF) solution and the absorbance was measured with a spectrophotometer at 526 nm for SA–NS, 418 nm for SA–1-naphthol and 480 nm for SA–phenol. The calibration curves were linear over the concentration ranges 0.14–2.86 × 10–6 mol l–1 NO2-N and 0.11–2.14 × 10–6 mol l–1 NO3-N for SA–NS, 0.71–18.86 × 10–6 mol l–1 NO2-N and 0.54–14.00 × 10–6 mol l–1 NO3-N for SA–1-naphthol and 0.21–7.21 × 10–6 mol l–1 NO2-N and 0.16–5.36 × 10–6 mol l–1 NO3-N for SA–phenol in aqueous samples. The molar absorptivity decreased in the order SA–NS > SA–phenol > SA–1-naphthol. In SA–NS, an unexpectedly high sensitivity was obtained because of the increased molar absorptivity in adsorption-DMF (9.75 × 104 l mol–1 cm–1, λmax = 526 nm), approximately five times larger than that in water (1.82 × 104 l mol–1 cm–1, λmax = 492 nm). The concentration factor decreased in the order SA–phenol > SA–NS > SA–1-naphthol. Interferences by various foreign ions were studied and the method was applied to the determination of low levels of nitrite and nitrate in water samples.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call