Abstract
AbstractThe contamination of water resources due to the exceed Pb content is becoming an environmental serious problem. Adsorption method in dynamic system using fixed bed column can be used to reduce the level of Pb in an attempt to suppress the toxic effects caused by Pb. This study aims to optimize the parameters of Pb adsorption on samples by mango wood sawdust in a dynamic system. Mango wood sawdust was activated by HNO3 and ethanol then packed in a column. Optimization of adsorption parameters including adsorbent heating temperature, adsorbent mass, pH of the influen solution, and the influen flow rate. The experiment result showed that the optimum conditions of mango wood sawdust to reducing Pb in samples are adsorbent was heated at temperature 145°C, using 3 grams adsorbent packed in a column, and the influen solution at pH 7 was passed at a flow rate 1 mL/min. Adsorption capacity of mango wood sawdust in reducing Pb in samples at optimum condition is equal to 14.8 mg/g of adsorbent and types of adsorption that occurs between the adsorbent with adsorbate is chemical adsorption . Keywords: Adsorption, dynamic system, fixed-bed column, mango wood sawdust, lead metal
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.