Colour stability, staining and roughness of silorane after prolonged chemical challenges

Abstract

ObjectivesTo investigate the effect of prolonged chemical challenges on colour stability, staining susceptibility, and roughness of a silorane composite material when compared to methacrylate-based composites. MethodsInitial colour and roughness were registered for specimens fabricated from methacrylate or silorane composites. Specimens were individually stored at 37°C in 0.02N citric acid, 0.02N phosphoric acid, 75% ethanol or distilled water for 7, 14, 21 and 180 days, when new measurements were performed. A staining test was performed after the chemical challenge by immersion in coffee during 3 weeks at 37°C. Colour changes were characterized using the CIEL*a*b* colour system. Data were submitted to analysis of variance for repeated measures, two-way analysis of variance and Tukey's multiple comparison test (α=0.05). ResultsColour changes on the methacrylate-based resins were considered acceptable (although significantly different) after immersion in water, citric acid, phosphoric acid or ethanol, but were unacceptable for the silorane composite immersed in ethanol for 180 days. The methacrylate-based resins stored in ethanol were significantly more stained by coffee than those stored in other media. The silorane composite demonstrated no staining, but increased roughness, when compared to the methacrylate-based resins. ConclusionsNo effect of the immersion solution was noticed on roughness of the investigated materials. Ethanol influenced colour stability and staining susceptibility differently for the methacrylate-based and silorane composites. Clinical significanceThe knowledge of how acids and solvents affect the properties of tooth-coloured restorative materials is one of the decision-making criteria for the selection of a restorative material.