Color decomposition method for multiprimary display using 3D-LUT in linearized LAB space

Abstract

This paper proposes a color decomposition method for a multi-primary display (MPD) using a 3-dimensional look-up-table (3D-LUT) in linearized LAB space. The proposed method decomposes the conventional three primary colors into multi-primary control values for a display device under the constraints of tristimulus matching. To reproduce images on an MPD, the color signals are estimated from a device-independent color space, such as CIEXYZ and CIELAB. In this paper, linearized LAB space is used due to its linearity and additivity in color conversion. First, the proposed method constructs a 3-D LUT containing gamut boundary information to calculate the color signals for the MPD in linearized LAB space. For the image reproduction, standard RGB or CIEXYZ is transformed to linearized LAB, then the hue and chroma are computed with reference to the 3D-LUT. In linearized LAB space, the color signals for a gamut boundary point are calculated to have the same lightness and hue as the input point. Also, the color signals for a point on the gray axis are calculated to have the same lightness as the input point. Based on the gamut boundary points and input point, the color signals for the input point are then obtained using the chroma ratio divided by the chroma of the gamut boundary point. In particular, for a change of hue, the neighboring boundary points are also employed. As a result, the proposed method guarantees color signal continuity and computational efficiency, and requires less memory.