Colloid transport and deposition in water-saturated Yucca Mountain tuff as determined by ionic strength.

Abstract

Colloid mobility and deposition were determined in model systems consisting of quartz sand or crushed Yucca Mountain tuff, latex microspheres (colloidal particles), and simulated groundwater. Ionic strength (I) was manipulated as a first step in defining limiting conditions for colloid transport in a system modeled after geochemical conditions at the Yucca Mountain site. Solutions of deionized water (DI), 0.1x, 1x, and 10x (the ionic strength of simulated groundwater) (I = 0.0116 M) were used in saturated columns under steady-state flow conditions. Separate experiments with conservative tracers indicated stable hydrodynamic conditions that were independent of I. Colloids were completely mobile (no deposition) in the DI and 0.1x solutions; deposition increased to 11-13% for 1x and to 89-97% for 10x treatments with similar results for sand and tuff. Deposition was described as a pseudo-first-order process; however, a decreasing rate of deposition was apparent for colloid transport at the 10x condition through the tuff. A linear dependence of colloid removal (extent and deposition rate coefficient) on I is illustrated for the model Yucca Mountain system and for a glass-KCl system reported in the literature. This simple relationship for saturated systems may be useful for predicting deposition efficiencies under conditions of varying ionic strength.