Abstract
The cooperative effect of hybrid Au-Ag nanoparticles and organic-inorganic cathode interfacial layers to advance the power conversion efficiency (PCE) of regio regular (rr) P3HT:PCBM based polymer solar cells (PSCs) are systematically demonstrated. In this work initially, two types of plasmonic nanoparticles (NPs), namely, citrate stabilized gold (AuNPs) and silver (AgNPs) were separately synthesized and then physically blend together with three different volume ratio [AuNPs + AgNPs (25:75), AuNPs + AgNPs (50:50) and AuNPs + AgNPs (75:25)]. These three blended NP solutions were then mixed together in the PEDOT:PSS (20 v/v %) hole extraction layer (HEL) to form three new NPs doped HEL and their effect on the rr-P3HT:PCBM based PSCs were systematically analyzed. For dual organic-inorganic cathode interfacial layers, two organic hole blocking materials, BPhen and BCP were used for enhanced charge collection in combination with LiF:Al as conventional cathode electrode. The collective effect of hybrid NPs with the dual cathode interfacial layers was examined with two varying active polymer blends, rr-P3HT:PC61BM and rr-P3HT:PC71BM. It has been found that the PCE increases considerably for both the active blend systems, with PEDOT:PSS + [AuNPs:AgNPs (25:75)] + BCP:LiF:Al as the modified cathode electrode. This is due to suitable electronic energy level matching of BCP:LiF:Al and active blend with the excellent surface plasmon property of the AuNPs:AgNPs (25:75) in the UV–Visible region compared to AuNPs:AgNPs (50:50) and AuNPs:AgNPs (75:25). Devices having configuration PEDOT:PSS + [AuNPs:AgNPs (25:75)] as HEL, rr-P3HT:PC71BM as active blend and BCP:LiF:Al provided PCE, ɳmax = 5.71% with Jsc = 16.44 mA/cm2, Voc = 0.58 V, FF = 60% and device with rr-P3HT:PC61BM as active blend layer was showing as PCE, ɳmax = 5.31% with Jsc = 14.77 mA/cm2, Voc = 0.58 V and FF = 62% with the same PEDOT:PSS + [AuNPs:AgNPs (25:75)] layer and BCP:LiF:Al. These results conclusively described a very simple technique in which the cooperative effect of plasmonic hybrid metals nanoparticles and dual cathode interfacial layers outstandingly enrich the PCE and in general the complete nature of rr-P3HT:PCBM based PSCs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
