Collapse of long, noncircular, cylindrical shells under pure bending

Abstract

This paper describes an extension of a method developed in a previous paper to determine the moment carrying capacity of elastoplastic noncircular cylindrical shells with infinite length by the finite element method. As a result of the shape change in the cross section of a shell during deformation, the bending moment reaches a global maximum value and then decreases as the bending curvature further increases. The shell would consequently collapse at the maximum moment. However, a bifurcation buckling may occur before the maximum moment can be developed. This bifurcation buckling could induce collapse of the shell under a moment less than the maximum. Determination of the likelihood that the bifurcation buckling would generate shell collapse may be made from the initial post-buckling behavior. An initial post-buckling analysis based on the J 2 deformation theory of plasticity has been developed in this paper. The finite element method with one spatial variable is used to locate the bifurcation point as well as to analyze the initial post-buckling behavior. Numerical examples of cylindrical shells with various cross-sectional shapes are shown. In particular, for a shell of square cross section, the moment at the bifurcation is much lower than the maximum value; however, the initial post-buckling analysis reveals that the state of equilibrium is still stable. Deep post-buckling analysis is required to determine the moment carrying capacity of a shell with such cross section.