Cold welding adhesion for spacecraft repair: Experiment design and roadmap

Abstract

Collisions with micrometeoroids and space debris can perforate spacecraft shields and hulls; in-situ repair or substitution of the damaged elements is currently considered a complex task, in particular the case of crewed modules with pressurized elements. In this context, cold-welding can overcome the current technological difficulties allowing fast and safe repairing procedures. To date, it has been shown that similar metallic materials can fuse or weld at ambient temperatures provided that there are sufficiently high contact forces. In the space environment this fusion is aided by the fact that the joint surfaces do not re-oxide after wear and, as a consequence, atomic diffusion of the metal occurs at lower contact forces. It has also been demonstrated that, even under terrestrial conditions, the action of a low fretting load can nearly double this adhesion force.In this paper, the suggested utilization of cold-welding phenomenon for spacecraft hull repair is described, as well as a verification road map to demonstrate its feasibility. It is proposed to develop an experimental test rig to apply custom repair patches of different materials to pre-damaged metallic structures and monitor the performance the adhered joint in low orbit and during re-entry. The test samples will include simple plates, Whipple shields, and sandwich panels that have been subjected to hypervelocity impacts. In the first phase, the cold-welding phenomena will be investigated in ground laboratories and validated in a vacuum chamber; afterwards, it is proposed to repeat the experiment in microgravity conditions, during a sounding rocket flight. Results will include an assessment of the contact forces necessary to apply the repair patch and an evaluation of the structural properties of the refurbished systems.