Cold rolled tungsten (W) plates and foils: Evolution of the microstructure

Abstract

This paper is the first part of our series on ultrafine-grained (UFG) tungsten produced by cold rolling. The aim of our project is to investigate the correlation between microstructure, mechanical properties and deformation mechanisms in UFG tungsten, a material interesting for future high-temperature applications. For this purpose, a batch of tungsten sheets with different thicknesses has been produced by subsequent cold rolling out of a single sintered compact.The aim of this paper is to characterise the microstructure of the as-received tungsten sheets. Quantitative grain size analysis by EBSD confirms a grain refinement by cold rolling well down into the UFG-regime, reaching 240nm in the S-direction for the 100μm foil. The grain refinement comes with an increase in the number of HAGBs, while LAGBs show no correlation with the degree of deformation introduced by cold rolling. All plates are distinctively textured, the main texture being the {001}〈110〉-orientation (rotated cube texture).Vickers microhardness measurements confirm a steady increase in hardness with advanced rolling up to 687kg/mm2 for the 100μm foil. This indicates that the one-dimensional grain refinement to UFG by cold rolling is sufficient to achieve properties comparable to other UFG tungsten specimens. Therefore, it can be concluded that the batch of samples introduced in this paper will be fit to investigate the evolution of mechanical properties and deformation mechanisms in correlation with the microstructure.