Abstract
Coir fiber (CF) reinforced polypropylene (PP) composites were fabricated using an extruder machine. The fiber contents were varied 5 to 20% and physico-mechanical properties as well as bio-degradability were also tested. Ultimate tensile strength and flexural strength decreases with the increases of percentages of fiber addition. Lowest percentage elongation is observed at 20% CF+PP composite which are rigid in nature. Leeb rebound hardness also decreases with the increase of percentage of raw fiber addition. The bio-degradation of different percentage of CF and PP composites in soil and saline water increased with increase of coir fiber content. Thus, it showed that higher percentage of coir fiber was produced more biodegradable and eco-friendly byproducts. However, higher percentages of coir fiber decrease the mechanical properties. A moderate percentage of coir fiber i.e. 15% CF +PP showed the good mechanical properties as well as considerable amount of bio-degradability in soil and saline water.J. Environ. Sci. & Natural Resources, 10(1): 61-64 2017
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Environmental Science and Natural Resources
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
