Abstract

The self-phase locking of a stimulated Brillouin scattering-phase conjugate mirror (SBS-PCM) allows a simple and scalable coherent beam combination of existing lasers. We propose a simple optical system composed of a rotating wedge and a concave mirror to overcome the power limit of the SBS-PCM. Its phase locking ability and the usefulness on the beam-combination laser are demonstrated experimentally. A four-beam combination is demonstrated using this SBS-PCM scheme. The relative phases between the beams were measured to be less than λ/24.7.

Highlights

  • A high-power laser with a pulse width of several ns, a repetition rate exceeding 10 Hz, and a power level of more than 1 kW has many applications in both scientific and industrial fields [1]

  • The self-phase locking of a stimulated Brillouin scattering-phase conjugate mirror (SBS-PCM) allows a simple and scalable coherent beam combination of existing lasers

  • We propose a simple optical system composed of a rotating wedge and a concave mirror to overcome the power limit of the SBS-PCM

Read more

Summary

Introduction

A high-power laser with a pulse width of several ns, a repetition rate exceeding 10 Hz, and a power level of more than 1 kW has many applications in both scientific and industrial fields [1]. In 2001, Yoshida et al showed that the input power limit of the SBS-PCM can be increased by continuously moving a focal spot inside the medium using a rotating wedge [16] In this way, the heat load is distributed to a large volume and the reflectivity and fidelity can be improved significantly. The SBS-PCM with the rotating wedge in Yoshida’s scheme is not self-phase-locking and cannot be utilized in a coherent beam-combination laser. There was remaining path length fluctuation of 1 to 3 λ after the alignment depending on the rotating-wedge/SBS-cell combination. We surmised that this was due to the surface irregularity of the optics and the gap in the ball bearing of the rotating wedge mount

Experimental setup and results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.