Abstract

The co-effects of lanthanide oxide Tm2O3 and porous silica on the hydrogen storage properties of sodium alanate are investigated. NaAlH4–Tm2O3 (10 wt%) and NaAlH4–Tm2O3 (10 wt%)-porous SiO2 (10 wt%) are prepared by the ball milling method, and their hydrogen desorption/re-absorption capacities are compared. Dehydrogenation process was performed at 150 °C under vacuum and rehydrogenation was performed at 150 °C for 4 h under ∼9 MPa in highly pure hydrogen. The results show that Tm2O3 has a catalytic effect on the hydrogen desorption and re-absorption of NaAlH4. The hydrogen desorption capacity of Tm2O3 single-doped NaAlH4 is 4.6 wt%, higher than that of undoped NaAlH4 (4.3 wt%). During the dehydrogenation process, NaAlH4 is completely decomposed and no intermediate product Na3AlH6 is detected. The addition of porous silica improves the dehydrogenation performance of NaAlH4. Tm2O3 and porous silica co-doped NaAlH4 could release a maximum hydrogen amount of 4.7 wt%, higher than that of undoped NaAlH4 and Tm2O3 single-doped NaAlH4. Moreover, porous silica improves the reversibility of hydrogen storage in NaAlH4.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.