Abstract

Water soluble and insoluble oxidizing compounds are formed during the non-steady state clean water test in certain natural water systems causing interference with Winkler dissolved oxygen determination. This results in pseudo high oxygen transfer efficiency of aerator devices. The interfering precipitate consists mainly of hydrated cobaltic oxide. Evaluation of the electrochemical-oxygen equivalent measurements made the presence of hydrated cobalt dioxide in the precipitate plausible. The presence of hydrogen peroxide in the filtrate suggested the formation of peroxodi- and peroxomono-sulfuric acid during the reaeration step. The pH along with the buffering capacity of a test water are the most critical water quality parameters directly affecting the magnitude of the cobalt interference. At pH values of 6.9 and below the cobalt and peroxide interference in the non-steady state clean water tests can be eliminated. Maximum cobalt interference was found to occur at pH values of 10–11.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.