Abstract

The performance of one-dimensional (1D) TiO2 nanotube based dye-sensitized solar cells (DSCs) was limited by the insufficient surface area of TiO2 nanotubes. To solve this issue, coaxial multiple-shelled TiO2 nanotube arrays were successfully synthesized on the transparent conductive oxide (TCO) substrates by using improved ZnO nanorod template assisted layer by layer absorption and reaction (LbL-AR) technique. To fabricate tube-in-tube nanostructures, LbL-AR TiO2 coatings were successively deposited on the exterior walls of the ZnO nanowires and the sacrificial sol–gel ZnO spacers, which were removed together by selective etching to form the hollow tubal structures. The performance of dye-sensitized solar cells (DSCs) increases with increasing the shell number of multi-shelled TiO2 nanotube photoanodes, attributed to the increase of the surface area, which was confirmed by N2 adsorption-desorption isotherms and the dye-loading capacities. A maximum efficiency of 6.2% was achieved for a quintuple shelled TiO2 nanotube photoanode with a short-circuit current density (Jsc) = 15 mA cm2, open-circuit voltage (Voc) = 0.73 V and fill factor (FF) = 0.57.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call