Abstract
This study examined the effects of metal coagulant concentration, effluent dilution and pH on the removal of total carbon, colour and turbidity from a combined bleached chemithermomechanical/thermomechanical (BCTMP/TMP) effluent. Both chloride and sulphate salts of iron and aluminum were effective in treating the mechanical pulping effluent in batch jar screening tests. pH had a pronounced affect on precipitation. In terms of minimizing the total carbon (TC), colour and turbidity levels, the optimum adjusted pH ranges were: 4.0–6.5 for ferric chloride, above 7.4 for ferrous sulphate, 5.0–6.0 for aluminum chloride and 5.8 to 6.8 for aluminum sulphate. Removal of TC, colour and turbidity of up to 88, 90 and 98%, respectively, were observed. The precipitation yielded a supernatant which was virtually clear and colourless.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.