Co3O4-modified TiO2 nanotube arrays via atomic layer deposition for improved visible-light photoelectrochemical performance.

Abstract

Composite Co3O4/TiO2 nanotube arrays (NTs) were fabricated via atomic layer deposition (ALD) of Co3O4 thin film onto well-aligned anodized TiO2 NTs. The microscopic morphology, composition, and interfacial plane of the composite structure were characterized by scanning electron microscopy, energy dispersion mapping, X-ray photoelectron spectra, and high-resolution transmission electron microscopy. It was shown that the ultrathin Co3O4 film uniformly coat onto the inner wall of the high aspect ratio (>100:1) TiO2 NTs with film thickness precisely controlled by the number of ALD deposition cycles. The composite structure with ∼4 nm Co3O4 coating revealed optimal photoelectrochemical (PEC) performance in the visible-light range (λ > 420 nm). The photocurrent density reaches as high as 90.4 μA/cm(2), which is ∼14 times that of the pristine TiO2 NTs and 3 times that of the impregnation method. The enhanced PEC performance could be attributed to the finely controlled Co3O4 coating layer that enhances the visible-light absorption, maintains large specific surface area to the electrolyte interface, and facilitates the charge transfer.