Abstract

The CO2 absorption performance of hollow-fiber membranes and conventional packed-bed column reactors under similar operating conditions was evaluated. Two-scale, nonisothermal, steady-state models were used to simulate the reactors behavior. The membrane reactor model accounts for CO2 diffusion in gas-filled membrane pores, CO2 and amine diffusion accompanied by chemical reaction in liquid-filled membrane pores, and CO2 and amine diffusion accompanied by chemical reaction in the liquid film zone surrounding the inside membrane wall. The packed-bed column reactor model interconnects a two-fluid 2D hydrodynamic platform with 2D mass and energy transport equations in the gas and liquid phases and nonlinear differential equations governing diffusion and reaction in the liquid film. In the absence of membrane wetting, the hollow-fiber membrane reactor outperforms the packed-bed column reactor with similar volume and specific surface area. This is not the case under membrane wetting conditions, when at low spec...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.