CO2 capture from flue gases in a temperature swing moving bed

Abstract

This paper presents a test stand for the capture of CO2 from flue gases arising due to firing pulverised hard coal. The stand, financed from the 2014–2021 Norway Grants, is installed at a Polish power plant. The innovation of the proposed CO2 capture method, developed by the Norwegian partner in the project (SINTEF Industry), lies in the use of activated carbon in the process of temperature swing adsorption in a moving bed. The paper also presents preliminary results of numerical simulations performed using the General PROcess Modelling System (gPROMS) software. The simulations concerned the operation of a supercritical power unit combined with a system for capturing CO2 from flue gases. Transient operation of the system was analysed, assuming rapid changes in the power unit load. Special attention was paid to the CO2 capture process energy consumption at an increase in load by 5% of the power unit nominal capacity in 30 s. It is found that the proposed CO2 capture method “keeps up” with such rapid load changes at the method energy consumption smaller than 2 MJ/kg CO2.