Co-pyrolysis of sewage sludge and rice husk/ bamboo sawdust for biochar with high aromaticity and low metal mobility

Abstract

Blending waste biomass for co-pyrolysis is generally regarded as a promising method for reduced-volume, value-added, and hazard-free treatment of sewage sludge. Hence, a comparison was made of the co-pyrolysis of sewage sludge with rice husk and with bamboo sawdust (1:1, w/w) at 400 and 700 °C and the properties and behaviors of selected metals in the corresponding biochars. Biochar produced by co-pyrolysis with both biomass wastes had larger (5 × 5 rectangle) aromatic clusters than did the sewage sludge biochar (4 × 4 rectangle) using the rectangle-like model on the basis of biochar molar H/C ratio, indicating increased aromaticity of the co-pyrolyzed biochars. Moreover, the molar O/C ratio of the sewage sludge-bamboo biochar was much lower than that of the sewage sludge-husk biochar, especially after pyrolysis at 700 °C (0.02 vs 0.27), suggesting greater recalcitrance to ageing. Co-pyrolysis of sewage sludge with husk invariably resulted in a higher percentage of metals studied in the residual fraction than co-pyrolysis with sawdust at the same temperature, leading to a lower risk index (14.2) because of the maximum metal encapsulation in the sewage sludge-husk biochar at 700 °C. Overall, co-pyrolysis of sewage sludge with husk provided higher metal immobilization but apparently lower biochar stability than co-pyrolysis with sawdust. These results provide an alternatively practical strategy for the safe disposal of sewage sludge and biomass wastes.