Abstract
ABSTRACT In the present work, multi-walled carbon nanotube (MWCNT) nanofiller reinforced copper-nickel alloy (CuNi@MWCNTs) nanocomposites were synthesised by a modified electro-chemical co-deposition followed by compaction and sintering. During this method, CuNi@MWCNTs were co-deposited on a cathode tip at room temperature and collected from the electro-chemical bath in powdered form. Subsequently, the powdered nanocomposites were dried, compacted and sintered to prepare solid pellets. The influence of different amounts (25, 50 and 100 mg L−1) of MWCNT nanofillers in the deposition bath on microstructure, mechanical and anti-corrosion properties of CuNi@MWCNTs nanocomposites was investigated. The microhardness, compressive yield strength and friction coefficient of CuNi@MWCNTs (100 mg L−1) nanocomposites were enhanced by 45.7%, 37.2% and 55.1%, respectively, compared to that of pure CuNi alloy. In addition, the CuNi@MWCNTs nanocomposites obtained also exhibited improved anti-corrosion property in 3.5 wt.% NaCl solution at continuous agitation of 150 rpm and 27°C temperature. Based on the research outcomes, this approach for synthesising CuNi@MWCNTs nanocomposites may be proposed for scale-up industrial trials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
