Abstract
A closed form expression capable of predicting the evolution of the shape of liquid capillary bridges and the resultant force between parallel platens is derived. Such a scenario occurs within many micro-mechanical structures and devices, for example, in micro-squeeze flow rheometers used to ascertain the rheological properties of pico- to nano-litre volumes of complex fluids, which is an important task for the analysis of biological liquids and during the combinatorial polymer synthesis of healthcare and personal products. These liquid bridges exhibit capillary forces that can perturb the desired rheological forces, and perhaps more significantly, determine the geometry of the experiment. The liquid bridge has a curved profile characterised by a contact angle at the three-phase interface, as compared to the simple cylindrical geometry assumed during the rheological analysis. During rheometry, the geometry of the bridge will change in a complex nonlinear fashion, an issue compounded by the contact angle undergoing hysteresis. Owing to the small volumes involved, ascertaining the bridge geometry visually during experiment is very difficult. Similarly, the governing equations for the bridge geometry are highly nonlinear, precluding an exact analytical solution, hence requiring a substantial numerical solution. Here, an expression for the bridge geometry and capillary forces based on the toroidal approximation has been developed that allows the solution to be determined several orders of magnitude faster using simpler techniques than numerical or experimental methods. This expression has been applied to squeeze-flow rheometry to show how the theory proposed here is consistent with the assumptions used within rheometry. The validity of the theory has been shown through comparison with the exact numerical solution of the governing equations. The numerical solution for the shape of liquid bridges between parallel platens is provided here for the first time and is based on existing work of liquid bridges between spheres.
Highlights
Capillary forces arising from surface tension is a frequently encountered phenomenon
[15], be used for particle transfer in microfluidics channels. The study of this geometry is of increasing importance as it can explain stiction in MEMS devices the geometry used squeeze flowinrheology
This paper focuses on the derivation of a closed form expression capable of predicting the evolution of the shape of the liquid bridge during squeeze flow rheometry, including the effects of evolution of the shape of the liquid bridge during squeeze flow rheometry, including the effects of contact angle hysteresis and the capillary force
Summary
Capillary forces arising from surface tension is a frequently encountered phenomenon. The study of solutions this geometry is of increasing importance as it can explain stiction in MEMS general these are not adaptable for modelling capillary bridges between twodevices planes. The study of this geometry is of increasing importance as it can explain stiction in MEMS devices the geometry used squeeze flowinrheology [17,18,19,20,21,22] To this end, and head/disk increasingly systems [15], being be used for for particle transfer microfluidics channels [16], andseveral is the investigators have studied capillary bridges between flat parallel surfaces [23,24,25,26,27].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.