Abstract

Abstract Kinematic estimations and dynamic performance assessments are fundamental theoretical issues to realize the mechanism from conceptual design to engineering application. In this article, the closed-form dynamic formulations of a 4-degrees-of-freedom (DoFs) parallel driving mechanism are derived by combining the Lagrange method and the virtual work principle. The selection principle of generalized coordinates and the steps for inverse dynamics modeling of the manipulator are proposed. Simulation results verify the correctness of the dynamic model, and a physical prototype has been built. Based on the dynamic modeling, the concise algebraic expression of the operational space inertia matrix of the parallel driving mechanism is deduced. Because the translation and rotation degrees-of-freedom are inconsistent in the operational space, the Jacobian matrix is adopted to map the inertia matrix from the operational space to the joint space. Based on the inertia matrix in joint space, the average energy transfer efficiency (AETE) index is proposed. Finally, two control techniques for the manipulator implementable in joint space are compared. The AETE index and dynamic modeling method suggested in this article can be further used in other manipulators for dynamic analysis and motion system design.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.