Clinically-implementable template plans for multidwell treatments using Leipzig-style applicators in 192Ir surface brachytherapy

Abstract

PurposeMultiple dwell positions (“multidwell”) within a Leipzig-style applicator can be used to increase dose uniformity and treatment area. Model-based dose calculation algorithms (MBDCAs) are necessary for accurate calculations involving these applicators because of their nonwater equivalency and complex geometry. The purpose of this work was to create template plans from MBDCA calculations and present their dwell times and positions for users of these applicators without access to MBDCAs. Methods and MaterialsThe Leipzig-style solid applicator model within our treatment planning system was used to design template plans. Five template plans, normalized to 0.3 cm depth within a water phantom, were optimized using the treatment planning system MBDCA. Each template plan contained unique dwell positions, times, and active lengths (0.5–1.5 cm). A single-dwell distribution was optimized for comparison. The stem of this applicator stops within the shell; therefore, one template plan contained an intrafraction rotation to determine the largest dose distribution achievable. Effects of imperfect applicator rotation were quantified by inserting rotational offsets and comparing the V100%, D95%, and minimum dose coverage for planning target volumes created from 80%/90% isodose lines. ResultsThe 90% (80%) isodose line dimensions at 0.3 cm depth for single-dwell increased from 0.94 × 0.97 (1.53 × 1.57) cm2 to 2.09 × 1.24 (2.75 × 1.88) cm2 in the largest template plan. Manually inserted angular offsets up to ±10° for the template plan requiring rotation preserved V100%, D95%, and minimum dose within 2.0%, 1.9%, and 8.0%, respectively. ConclusionA set of template plans was created to provide accessibility to the multidwell methodology, even for users without access to MBDCAs. Each template plan should be reviewed before clinical implementation.