Clinical effectiveness of orthodontic miniscrew implantation guided by a novel cone beam CT image-based computer aided design and computer aided manufacturing (CAD-CAM) template.

Abstract

BackgroundAlthough miniscrews are widely used in orthodontic treatment as temporary anchorage devices, their correct and safe placement has attracted little attention. This study aimed to introduce a novel cone beam CT (CBCT) image-based computer aided design and computer aided manufacturing (CAD-CAM) template for orthodontic miniscrew implantation and to evaluate the effectiveness of miniscrews implanted under the guidance of this template.MethodsThe CBCT scans of ten patients requiring miniscrews as anchorage were analyzed in NNT software to predetermine the insertion sites of miniscrew implants. The DICOM data of the scans, along with virtual miniscrews acquired in Solidworks software, were imported into Mimics software to construct three-dimensional (3D) images of teeth and bone and to determine the virtual position of miniscrews and 3D virtual templates were designed following consideration of the virtual implantation plans. A STL (Stereolithography) file of the virtual template was output, and the resin template was then fabricated with a stereolithographic appliance (SLA). 24 Miniscrews were then implanted guided by the template and clinical evaluation of their safety and stability, as well as their placement deviations, were made. A dental casts model and cephalometric analysis before and after orthodontic treatment were made to assess the dentomaxillofacial changes.ResultsAll 24 miniscrews had no contact with adjacent roots. 18 miniscrews had a grade I safety score and six had a grade II. The miniscrews were stable at 1, 3, 6, and 9 months after implantation, although there was mild inflammation around two miniscrews. Implantation deviation of miniscrew in the crown was (1.03±0.65) and (1.26±0.72) mm in the apex, on average. Satisfactory dentomaxillofacial changes in 10 patients with these 24 miniscrews as anchorage were acquired.ConclusionsMiniscrews could be implanted in the targeted position safely and precisely when guided by the novel templates, and remained stable during orthodontic treatment. Patients treated with these miniscrews as anchorage in orthodontic treatment acquired satisfactory dentomaxillofacial changes.