Clearance compatibility and design principle of the single-structured hybrid gas-magnetic bearing

Abstract

PurposeThis paper aims to study the clearance compatibility of active magnetic bearing (AMB) and gas bearing (GB) to achieve a single-structured hybrid gas-magnetic bearing (HGMB), which uses a single bearing structure to realize both the functions of gas bearing and magnetic bearing.Design/methodology/approachBecause the radial clearance size of the AMB is typically ten times larger than that of the GB, radial clearance compatibility of GB and AMB needs to maximize the radial clearance of GB by adjusting structural parameters. Parametric analysis of structural parameters of GB is explored. Furthermore, a general structural design principle based on static analysis, rotordynamic performance and system stability is established for the single-structured HGMB.FindingsLoad capacity is vastly reduced due to the enlarged radial clearance of the GB. A minimum clearance needs to be ensured by increasing the bearing diameter or width to compensate for the reduced load capacity, yet indirectly raising the bearing load. Increased bearing load is conducive to stability, yet it raises the risk of rotor abrasion. In addition, excessively large bearing diameter leads to system instability, and inappropriate bearing width affects critical speeds. A general structural design principle is established and the designed HGMB–rotor processes optimal performances.Originality/valueA single-structured HGMB is proposed to address the urgent demand for high-speed, cryogenic turboexpanders with frequent starts/stops. This design applies a single-bearing structure to realize the characteristics of both GB and AMB, greatly simplifying the implementation, reducing air friction loss and raising critical speeds. This paper provides a fresh perspective on the development of cryogenic turboexpanders for hydrogen liquefaction. It theoretically validates the feasibility and provides a design guide for a single-structured HGMB system.