Classification of sediments on exposed tidal flats in the German Bight using multi-frequency radar data

Abstract

We present a new method for the extraction of roughness parameters of sand ripples on exposed tidal flats from multi-frequency synthetic aperture radar (SAR) data. The method is based on the Integral Equation Model (IEM) which predicts the normalized radar cross-section (NRCS) of randomly rough dielectric surfaces. The data used for this analysis were acquired in the German Bight of the North Sea by the Spaceborne Imaging Radar-C/X-Band SAR (SIR-C/X-SAR) in 1994. In-situ measurements of the root-mean-squared (rms) height and the correlation length of the sand ripples clearly demonstrate a relationship between these roughness parameters and the C-band NRCS determined from an ERS SAR image. Using the IEM we have calculated NRCS isolines for the three frequency bands deployed by SIR-C/X-SAR (L, C, and X band), as a function of the rms height and the correlation length of the sand ripples. For each SIR-C/X-SAR image pixel these two roughness parameters were determined from the intersections of the NRCS isolines at different radar bands, and they were used for a crude sediment classification for a small test area at the German North Sea coast. Comparing our results with available sediment maps, we conclude that the presented method is very promising for tidal flat classification by using data from presently existing airborne and future spaceborne multi-frequency SAR systems.