Clarifying the irradiation effect on the general oxidation of 316L stainless steel in high temperature hydrogenated water after 1000h immersion

Abstract

The role of proton irradiation in the general oxidation of 316 L stainless steel in simulated PWR primary water after 1000 h immersion was clarified by comparing the microstructural and microchemical features of oxides formed on both the irradiated and un-irradiated regions of identical grains. Hence, the interference from differences in crystallographic orientation can be ruled out. Interestingly, the average inner oxide thickness on the irradiated region is significantly thinner than that on the un-irradiated region. The enhanced resistance to oxidation on the irradiated region originates from the more protective inner oxide layer and the formation of a continuous Ni-rich zone near the oxide/matrix interface. The inner oxide formed on irradiated region is less deficient in cation due to the enhanced diffusion of Cr from matrix by the irradiation-induced defects, thus making a better diffusion barrier. Meanwhile, the formation of continuous Ni-rich zone near the oxide/matrix interface, which is facilitated by the Ni-rich defects serving as nuclei, fast generation of vacancy at the interface and suppression of the outward diffusion of surplus Ni, can diminish the available space for the growth of inner oxide. The limited oxidation space and high Cr content at the oxide/matrix interface in the irradiated region result in the formation of rocksalt oxide while spinel oxide is formed near the interface in the un-irradiated region.