Clarifying the effects of comonomer distribution between short and long chains on physical and mechanical properties of ethylenic copolymers

Abstract

AbstractIn this paper, two Zigler‐Natta catalysts (ZNCs) were used to synthesize a commercially available linear low‐density polyethylene (LLDPE), widely used in the packaging industry, on an industrial scale. The catalysts differ only in their ability to distribute comonomers between short and long chains. Both catalysts were fully characterized in the first section, and two similar ethylene/1‐butene copolymers were made using them. Afterward, the produced copolymers were fully characterized using different techniques; namely, differential scanning calorimetry (DSC), successive self‐nucleation and annealing (SSA), oxygen induction time (OIT), melt flow index (MFI), rheometric mechanical spectroscopy (RMS), and a wide range of mechanical experiments. It was revealed that while the presence of comonomers in short chains can reduce their resistance against oxidation (by more than 30%) and can cause a dramatic change in friction coefficients (by more than 20%), some of the other main mechanical properties of the made copolymers were independent of comonomer distribution between long and short chains. In addition, it was shown that ethylenic copolymers' strain hardening modulus (SHM) takes advantage of the homogenous distribution.