Abstract
Clarified oil (CLO) from a commercial fluid catalytic cracking unit was subjected to solvent extraction followed by solvent dewaxing and adsorption chromatography to analyze its various components for different end-use applications. The clarified oil was first solvent extracted using N-methyl pyrrolidone (NMP) to produce paraffinic rich raffinate (68.9 wt% yield). The raffinate thus obtained was dewaxed using methyl isobutyl ketone (MIBK) to get an oil of pour point 0°C. This dewaxed oil was then subjected to adsorption chromatography to determine group II base oil potential through yield v/s viscosity index (VI) curve. The results revealed that clarified oil has an actual potential of around 27.1 wt% of group II base oil components, suggesting that clarified oil can be used as an additional source of feed for production of group II base oil. This article also describes the potential of other components in clarified oil such as slack wax (24.2 wt%), aromatics (31.1 wt%), and low VI oil (17.6 wt%).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.