Abstract
The phase profiles of the reflected circularly polarized waves can be freely manipulated by virtue of a co-polarization reflective metasurface. Based on the co-polarization reflective metasurface, a circularly polarized wave reflection focusing metasurface can be achieved, it can make the reflected waves focus at a focal spot under the normal incidence of circularly polarized plane waves. In this paper, a reflection focusing metasurface is designed. It is found that around the central frequency f=16 GHz, the reflected waves focus on a focal spot above the metasurface with a focal distance L=200 mm under the normal incidence of right-handed circularly polarized waves. However, in the case of normal incidence of left-handed circularly waves, the reflected waves focus on an imaginary focal spot below the metasurface with the focal distance L=-200 mm. The beam-width at the focal spot and focal depth are also calculated by using CST Microwave Studio. The simulation results indicate that the beam-width at the focal spot is approximately equal to the operating wavelength. Therefore, the circularly polarized wave reflection focusing metasurface has a good performance for focusing the reflected waves. In addition, the proposed focusing metasurface displays the advantages of the long focal depth and the broad operating bandwidth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.