Abstract
In this article, we are proposing a linearly polarized (LP) printed dipole antenna (PDA) combined with a transmissive-type frequency selective surface (FSS). The proposed FSS converts LP waves to circularly polarized (CP) with two frequency bands with the corresponding center frequencies of f1 = 7.2 GHz and f2 = 9.1 GHz, respectively. The LP dual-band PDA is designed so that its impedance bandwidth (IBW) overlaps with the operating frequencies of the FSS converter. Based on the simulated and experimental results, the proposed PDA has two fractional IBW covering 6.98–7.29 GHz and 8.95–10.07 GHz. The average measured gains of the first and second frequency bands are about 6.23 dBi and 6.51 dBi, individually. Considering the advantages of linear-to-circular polarization conversion, the FSS polarization converter has been embedded on top of the antenna to achieve the desired circular polarization. Measured results show that the combination of the PDA and the FSS converter forms a CP which reveals a 3-dB axial ratio bandwidth (ARBW) in the first (6.91–7.42 GHz) and second (8.93–9.35 GHz) frequency bands.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: AEU - International Journal of Electronics and Communications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.