Abstract
CrN/NbN superlattice coatings have been developed as an attempt to replace electroplated chromium in some applications. The coatings have been deposited by a combined cathodic-arc/unbalanced magnetron technique in an industrial-size physical vapour deposition (PVD) coater. The investigations have been focused on the question of maximum hardness, adhesion and tribological performance of the coatings deposited at 400°C as a function of the nitrogen content in the films. All CrN/NbN superlattice coatings produced exhibit a single-phase face-centred cubic structure and {200} preferred orientation. The superlattice period of the coatings varies in the range Δ=3.4–7.4 nm depending on the N2 flow rate. Under the sputtering conditions used, it was possible for stoichiometric CrN/NbN coatings to be deposited only in a narrow N2 flow rate range of around 160 sccm. Both stoichiometric and sub-stoichiometric coatings showed maximum hardness values of Hk=3580 and Hk= 3600, respectively. CrN/NbN superlattice coatings outperformed electroplated chromium by factor of 13 in dry sliding conditions. However, both coatings show similar abrasive wear in the range of 0.63 μm N−1. Stoichiometric CrN/NbN superlattice coatings possess high oxidation resistance in the range 820–850° C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.